Page:
Display Filters
No results
1
Display Filters
Ariel Alejandro Arigossi edited this page 2026-10-14 02:52:12 +00:00
Table of contents
Display Filters
Display filters select the packets shown in every tab. The syntax follows Wireshark's.
Syntax
expression := field operator value | field value | field | protocol
combine with: and (&&) or (||) not (!) ( ... )
operators := == != > < >= <= contains matches
field valuewithout an operator means==:port 53,host 10.0.0.1.- A field on its own tests that it is present:
tcp.flags. - A bare protocol name matches the transport or application protocol:
dns,tls,smb. - Addresses accept CIDR networks:
ip.addr == 192.168.0.0/16. containsis a case-insensitive substring;matchesis a regular expression.- Fields with two values (
ip.addr,port) match if either value matches;!=only if neither does.
Fields
| Field | Meaning |
|---|---|
ip.src, ip.dst, ip.addr (host) |
IPv4/IPv6 addresses |
eth.src, eth.dst, eth.addr |
MAC addresses |
port, srcport, dstport, tcp.port, udp.port |
ports |
tcp.flags |
flag letters, e.g. S, SA, PA, R |
tcp.seq, tcp.ack, tcp.len, tcp.window_size |
TCP header values / payload length |
udp.length |
UDP payload length |
icmp.type, icmp.code, vlan.id, ip.ttl, ip.version |
other header fields |
dns.qry.name, http.host, tls.sni |
names from the payload |
proto |
transport or application protocol name |
len / frame.len, frame.number, time |
frame size, number, seconds from the start |
info |
the Info column text |
expert |
TCP analysis notes |
TCP analysis keywords: tcp.analysis.flags (any problem), tcp.analysis.retransmission,
tcp.analysis.duplicate_ack, tcp.analysis.zero_window, tcp.analysis.reset.
Examples
| Filter | Shows |
|---|---|
ip.addr == 192.168.1.10 |
traffic to or from one host |
ip.src == 10.0.0.0/8 and tcp.port == 443 |
HTTPS from the 10.x network |
tcp.flags == S |
connection attempts (SYN only) |
tcp.analysis.flags |
packets with TCP problems |
dns.qry.name contains "example" |
DNS lookups of a domain |
tls.sni matches "\.ru$" |
TLS sessions to .ru servers |
http and info contains "POST" |
HTTP form submissions |
not (tcp or udp) |
everything that is neither TCP nor UDP |
len > 1000 and not tls |
large non-TLS packets |
Press F1 in the application for a quick reference.